The electromagnetic boiler valve also affects the heating effect, so how to use it? How to clean up and maintain? Jinghua Flow will introduce the followings to you : .

1.   When the electromagnetic boiler is not heated or there is sound or backwater in pipeline, check valves needto be cleaned. If check valves is in normal use when the check valve is inspected with good sealing performance. You can continue to do the cleaning. Otherwise you will need to replace related check valves .

2, Check regularly the operation of the transmission line, feed pump, pressure switch, safety valve. Problems should be resolved in a timely manner.

3.   The drain valve of the electromagnetic boiler should remain open after the blowdown until the next operation, to avoid negative pressure problems.

4.   The electromagnetic boiler should check the flexibility of the water supply valve at all times. If there is insufficient pressure and the water level is too low, it should be checked whether the water supply valve can work normally. If it cannot work normally, it needs to be replaced。

5.   If the electromagnetic boiler stops working for a long time, the power should be cut off, and the drain valve should be opened to discharge all the water to avoid freezing

6.   The air exhaust valve of the electromagnetic boiler should be opened after each water injection, so that the air in the pipeline can be discharged to avoid the air blockage and affect the heating effect.

7. The pipeline valves of the electromagnetic boiler should be reasonably controlled in size, and the temperature of each room should be properly adjusted to achieve a suitable heating temperature to avoid waste.

If you are interested in more details of electric boiler valves, feel free to contact and discuss with us; sales@jhflow